產品中心
PRODUCT CENTER
- 聯系人 : 曹鏡森先生
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 移動電話 : 15989458768
- 地址 : ** 廣東省東莞市大朗鎮仙村仙一區99號
- Email : caojingshen@126.com
- 郵編 : 523792
- 公司網址 : http://www.tzyjwb.com
- MSN : caoshingcer@126.com
- QQ : 454992321
- 聯系人 : 曹鏡森
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 公司網址 : http://www.tzyjwb.com/
Slow machine edge recovery crusher
Mature material recovery management program
Specially designed for crushing waste and gates produced during recycling of plastic.
▲ need to break the material through the feed hopper feed, according to the different broken materials, a variety of feeding hopper to choose from.
▲ According to the different use, low-speed online crusher series in the optional installed on the way there are a variety of options, can be equipped with a feeding fan with recycling system, the immediate recovery method can also choose with a suction slot and bagging interface The use of a variety of ways to make the production of low-speed crusher series has a very wide range of uses for customers to solve different online crushing program.
The low-speed crusher combines the common advantages of the general low-speed crusher, such as low noise and less dust, and more excellent performance in its design, such as knives, rotors, and cranes specially designed for crushing waste and gates Disassemble the way, reflects the humidification of low-speed crusher. The machine uses the reducer drive mode, increases the torque, the machine may start at any time, even if there is broken material in the crushing chamber, you can also easily start the machine.
Slow machine edge recovery crusher perfect structural design
Split open body, easy to clean up the crushing chamber.
Chip - type die - cutting structure, distributed cutting load.
Free to adjust the knife design, replacement maintenance is more simple.
Ultra-quiet, fully enclosed double-layer sound insulation body design, effectively improve the workshop noise interference.
Low speed, high torque, less dust, stainless steel hopper easy to clean, durable, easy to operate and so on.
High strength, long life tool, more suitable for crushing the material containing fiber material.
Slow machine edge recovery crusher application range
Machine edge crusher used in manual or mechanical hand to the material crushed, with the plastic molding machine edge to take the machine to do the mouth of the shredded and waste recycling immediately, or with the belt conveyor will machine edge water
Ingredients are crushed.
Slow machine edge recovery crusher
Slow machine edge recycling crusher safe electrical configuration
With open, stop, emergency stop button and main power control switch, motor overload protection, feed bin recycling compartment with safety protection switch.
Slow machine edge recovery crusher working principle diagram:
Low speed machine edge recovery crusher can also choose other functions
Cyclone dust collector: effective separation of crushing and dust, easy to use the effective use of raw materials.
Dust collection bag: easy to clean up and reduce pollution.
Feeding fan device: can achieve automatic feeding, improve the efficiency.
Full alarm device: When the silo crushed to set the full material position, the machine automatically stops working and alarm to inform the user.
Specialized screen aperture: Φ4, Φ8, Φ10, Φ12, the user can be selected according to actual needs.
New material ratio valve: According to the production needs to adjust the mixing ratio of the new material.
Magnet adsorption: can effectively prevent the inlet from entering the crushing chamber inside a variety of iron debris, to prevent metal damage to the machine.Slow machine edge recovery crusher
粉碎機技術參數表
型號 |
口徑mm |
工作能力kg/hr |
電機工率 |
外形尺寸mm |
凈重kg |
軸心轉速 |
230A |
230×165 |
8-10 |
1HP(0.75KW) |
600×410×880 |
130 |
27-35r.p.m |
230B |
720×350×910 |
120 |
||||
250A |
255×230 |
10-15 |
2HP(1.5KW) |
615×580×980 |
192 |
27-35r.p.m |
250B |
820×450×980 |
163 |
||||
260A |
261×260 |
10-20 |
3HP(2.2KW) |
640×620×1030 |
202 |
27-35r.p.m |
260B |
850×450×1030 |
197 |
||||
350A |
354×260 |
15-30 |
3HP(2.2KW) |
710×610×1060 |
244 |
27-35r.p.m |
350B |
1000×530×1060 |
235 |
||||
350C |
354×260 |
15-30 |
5HP(3.7KW) |
710×630×1180 |
300 |
27-35r.p.m |
350D |
930×500×1180 |
287 |
||||
450A |
450×260 |
15-30 |
5HP(3.7KW) |
710×720×1180 |
330 |
27-35r.p.m |
450B |
930×600×1180 |
320 |
||||
570 |
570×435 |
20-30 |
5HP(3.7KW) |
1290×675×1661 |
730 |
27-35r.p.m |
machine.Low speed machine recycling crusher