Extrude the central feeding system

  Extrude the central feeding system
  
Extrusion of the central feeding system is able to achieve the central supply and control of the overall solution, in order to achieve the whole plant unattended continuous molding operation. According to the station in the customer site layout conditions and the consumption of the scene of raw materials and unique combination of auxiliary equipment designed.
The system uses industrial computers to automatically control all machines automatically, enabling continuous feeding operations (24 hours) for all consumable units. With the special functions of the machine within the system, can be a very good raw material dehumidification, drying, feeding, ingredients, mixing the special requirements. The central feed system is equipped with a variety of monitoring and protection functions. Safe and reliable operation. Is the enterprise to achieve unattended factory core premise.
Extrude the central feeding system
The control part of the extrusion control system is responsible for receiving the signals sent by each unit of work. After the calculation, the relevant commands are sent to each execution unit. The entire centralized water supply system of the brain, determines the stability of the entire system and success.
Extrusion of the central feeding system control cabinet with Siemens PLC and man-machine interface. Is the system safe and stable operation of the premise and guarantee.
Extrude the central feeding system
The dynamic part of the extrusion system is mainly composed of vacuum motors, safety filters, electronic pressure reducing valves, mechanical pressure reducing valves and so on. It is responsible for providing enough power for the whole system. It is coordinated with the system to complete a variety of loading tasks. It is the dynamic source of the whole system.

Extrusion of central feeding system transmission and transportation parts mainly include suction box, storage box, ingredients station, site pipeline, material removal valve. The function of the suction box is to cooperate with the system, the raw materials from the dryer to the automatic feeding machine. The caliber is determined by the system. The function of the material separation and adsorption shell is to cooperate with the system to load and clean the material to prevent the presence of residual substances in the pipeline. Use an antistatic hose clip that can effectively eliminate static electricity.

Extrude the central feeding system
Extrusion of central feed system Raw material processing Dryer, dehumidification dryer and storage tank is mainly to meet the product requirements of raw material temperature, effectively shorten the molding cycle time.


The centralized hopper receiver is the terminal of the entire system. The proportional valve is mainly used with the granulator to meet the special requirements of the molding machine used in the mixing of new and inferior materials.

Why choose to squeeze out the central feeding system?
◆ to achieve the whole plant unattended ingredients operation for the enterprise to save a lot of labor.
◆ With the cooling water circulation system, automatically remove the transmission system, hot and cold exchange system and recovery material recovery system, to achieve the whole plant can not run. Enterprises can save air conditioning, electric lights and other equipment consumption of energy.
◆ greatly improve the production efficiency, reduce production costs.
◆ greatly improve product quality, reduce scrap rate.
◆ According to the relevant requirements to adjust the different raw materials to save the enterprise encountered the trouble of replacement of raw materials.Extrude the central feeding system
◆ pipe does not take up the ground space for the enterprise to save a sufficient space.
◆ Pipeline layout and placement is artistic in order to effectively improve the production workshop environment.
◆ In the long run, the cost of saving money for enterprises is relatively cheap.
◆ to achieve closed pipeline transmission of raw materials, completely avoid workshop noise, dust and thermal pollution. Is the best system to maximize product quality.