立式注塑機集中加料設備

立式注塑機集中加料設備
隨著塑料生產行業的不斷發展，需要應用到滿足其生產要求的供料設備，注塑機集中供料系統能夠保證塑料成型的操作效率以及整個系統運行穩定，也能防止堵料現象的發生，對于生產現場來說，立式注塑機集中加料設備將原料及干燥料筒與現場徹底分開管理，節省空間?，F(xiàn)在很多廠家都有應用注塑機集中供料系統，那么大家知道立式注塑機集中加料設備有哪些優缺點嗎?一、

立式注塑機集中加料設備的優點：
1、立式注塑機集中加料設備是采用單機單管的設計施工方式，保證整個注塑機中央供料系統運行穩定，在輸送時管路處于密閉真空狀態，絕無堵料的現象發生。
2、注塑機中央供料系統是配合中央干燥系統使用，可使用干燥的空氣對原料進行輸送，防止干燥好的原料回潮。
3、在真空負壓作用下，原料中原有的粉塵會通過粉塵過濾系統被過濾出來，可以采用每單次吸料后時行空氣過濾逆向清洗，避免濾清器阻塞造成困擾。
4、同時作業員在**粉塵時恒榮公司*新研發一款馬達不停機設計，從而顛覆了傳統停機**粉塵的屏障;此設計不但避免護風機頻繁啟動造成損耗，更提高了生產效率。
二、注塑機集中加料設備的缺點：
1、設備造價高。
2、一次性投入材料多，更換材料品種困難。
上述就是關于注塑機集中供料系統優缺點的介紹，此外，注塑機集中加料設備的原料集中管理，避免浪費及污染現象，能夠很好地保持品質穩定，提高產值，維系質量體系。Vertical injection molding machine centralized feeding equipment
With the continuous development of the plastic production industry, need to meet the production requirements to meet the production equipment, injection molding machine centralized feeding system to ensure the efficiency of plastic molding and the stability of the entire system, but also to prevent the phenomenon of blocking material, Production site, the vertical injection molding machine centralized feeding equipment will be raw materials and dry barrels and the scene completely separate management, saving space. Now many manufacturers have application of injection molding machine centralized feeding system, then we all know that vertical injection molding machine centralized filling equipment, what are the advantages and disadvantages?

Vertical injection molding machine centralized feeding equipment advantages:
1, vertical injection molding machine centralized feeding equipment is a single single-tube design and construction methods to ensure that the entire injection molding machine central feeding system is stable,
2, the central injection system for the injection molding machine is used with the central drying system, the use of dry air on the raw materials for transportation, to prevent good raw materials back to moisture.
3, under the action of vacuum negative pressure, the original dust in the raw materials will be filtered through the dust filter system, you can use a single suction after the air filter reverse cleaning, to avoid damage caused by filter obstruction.
4, at the same time the operator in the removal of dust Hengrong company's latest research and development of a motor non-stop design, which subvert the traditional downtime to remove dust barrier; this design not only avoid frequent fan lift caused by loss, but also improve the production efficiency.
Second, the vertical injection molding machine centralized feeding equipment shortcomings:
1, equipment, high cost.
2, one-time input of materials and more difficult to replace the material varieties.
In addition, the vertical injection molding machine centralized feeding equipment, centralized management of raw materials to avoid waste and pollution, to maintain good quality stability, increase production value, maintain the quality system.