Injection molding special mold temperature machine

Injection molding special mold temperature machine

Injection molding special mold temperature machine
Since the establishment of the company has been focused on the factory temperature control field. With strong R & D reserves and a wealth of practical experience, is currently a focus on a single production temperature control equipment and provide temperature system solutions business. D'Aantai long-term and foreign host equipment manufacturers, well-known research institutions to maintain a close strategic partnership, the Thai people on the technical innovation, equipment quality tireless pursuit of the industry and users have been recognized and respected.
 

First, injection molding machine for the temperature of the feed test
(1) strict inspection standards, all accessories (standard parts) feed are in accordance with the Ministry of Chemical Industry standards (HG / T), national standards (GB / T) and mechanical standards (JB / T) test, and effective monitoring Parts of the quality of the core, very strict requirements for the material, the use of ...
Injection molding special mold temperature machine
Second, injection molding mold temperature welding process detection
Using the most rigorous welding X-ray detector to detect the weld, for organic heat carrier furnace test, 100% by the National Special Inspection Institute, and issued organic heat carrier furnace certificate. Testing equipment X-ray flaw detector production qualification certificate "organic heat carrier qualification certificate ...
Injection molding special mold temperature machine
Third, the injection molding mold temperature of the assembly process testing
(1) the company uses 100% full inspection screw tightening state, confirm OK after the use of RBI point check and then confirm to ensure that missed, missing the phenomenon of abnormal occurrences, by the IPQC will be targeted inspection, to prevent loss. (2) IPQC inspection 100% confirm the road map and accessories type ...

Fourth, injection molding mold temperature of the electrical process detection
(1) 100% check circuit diagram and line number (2) 100% use of multimeter test short circuit phenomenon (3) 100% after power test test current ...

Fifth, injection molding machine for the mold temperature control
(1) the use of colorimeter to confirm the color of the L, a, b value is within the tolerance requirements, while the development of the upper and lower limit color palette comparison; (2) coating reliability test: wear test, 100 grid test, Alcohol testing, RCA tape test, smoke test, sweat test ...

Six, injection molding machine for the whole machine temperature nitrogen pressure test
According to customer requirements, the use of nitrogen pressure 10 kg, which lasted 48H, confirm all the assembly, welding pipe sealing effect, to ensure that equipment will not leak or oil leakage ...

Seven, injection molding mold temperature simulation test
100% machine simulation test, and all according to customer site environmental conditions and equipment conditions for functional testing to ensure that the use of the client when the quality of stability and design rationality ...
Injection molding special mold temperature machine
Safety protection and indication system
   Power supply phase protection
   Total power supply without fuse circuit breaker
   Pump reverse protection and indicator light
   Pump overload protection and indicator light
   Water protection and indicator light
   Overheat protection and indicator light
Hot water BY-PASS pressure relief circuit
   Forced cooling
   Temperature anomaly alarm
   Abnormal protection and indicator light
Choose to install accessories
   The thermostat is connected to an external wiring
   Anti - leakage protection switch
   Oil return temperature display table
   Voltage exception protection switch
   Teflon tube